< Back

Initial Checks                                                                 Interim Service Full Service
Note client comments and recommendations
Check vehicle history
Check for any damage to bodywork
Check trims
Check mirrors
Check lamps
Check number plates
Check timing belt interval
Vehicle on the ground
Check ABS
Check condition and operation of seatbelts
Check horn
Check operation of interior lights and switches
Check operation of exterior lights and switches
Check front and rear windscreen wipers and washers
Check condition and security of windscreen
Check condition and security of rear view mirror
Check all interior warning lights
Check fuel cap
Check and top up power steering reservoir
Check air conditioning
Check PAS
Check auxiliary belt
Check condition and security of battery
Check clutch operation
Check handbrake operation and travel
Check pollen/cabin filter
Check and top up gearbox oil
Check and top up all under bonnet fluid levels
Check and top up axle oil
Check and top up brake fluid
Check and top up antifreeze
Check and top up clutch fluid
Check and top up transfer box oil
Lubricate door hinges, catches and locks
Check engine cooling fan
Check coolant system for leaks
Check operation of throttle
Inspect condition of HR leads
Replace air filter (if required, at extra cost)
Replace spark plugs (if required, at extra cost)
Vehicle raised (off the ground)
Complete and underbody inspection
Replace oil filter
Replace engine oil (if required, at extra cost)
Check condition and security of steering and suspension
Check condition and security of mountings
Check condition and security of gaiters
Check brake pipes
Check handbrake cables
Check hoses
Check exhaust system and fuel lines for security and leaks
Check cylinders/callipers for leakage
Check engine and gearbox mounts for wear
Test starter motor cranking operations and security
Inspect radiator and coolant pipes for security and leaks
Check all wheel bearings for noise
Check tyre condition and adjust pressure (if required)
Check and record drums and discs for condition and operation
Check and record brake pads/shoes for condition and operation
Check condition and operation of front and rear brakes
Refit wheels (if applicable) and set wheel torque
Final checks
Check exhaust emissions and idle speed
Reset service light (where required)
Conduct road test